Configuring PC-DMIS to Print Reports

By default, Inspect does not generate reports for PC-DMIS executions. If you want reports, you need to configure PC-DMIS to generate .pdf reports.

  1. Close Inspect and PC-DMIS.

  2. Run PC-DMIS by itself.

  3. From PC-DMIS, open a measurement routine.

  4. Choose File | Printing | Report Window Print Setup to open the Output Configuration dialog box.

  5. From the Output Configuration dialog box, go to the Report tab, and look at the settings under Report output.

  6. Select the Portable Document Format (PDF) output type.

  7. Click OK to save your changes and close the dialog box.

  8. Close PC-DMIS, and restart Inspect.