Step 3 - Define the Number of Ports
The final step prior to rack calibration of the LSPX1C / HR-X (HR-X1-P) is to define the number of ports on the rack you are calibrating.
To define the number of ports:
Select the Ports tab in the Probe Changer dialog box (Edit | Preferences | Probe Changer):
Probe Changer dialog box - Ports tab
In the Active probe changer list, select TYPE=LSPX1C.
In the Number of ports box, type the number of ports the probe changer has.
To save your changes, click Apply.
You are now ready to begin calibration. The next step starts the calibration process.