TNT and PCiia card settings
GPIB0
Bus Timing 500ns
Cable length for high speed disabled
Primary Address 30
Secondary Address None
Terminate read on EOS No
Set EOI with EOS on write No
8 bit EOS compare No
Send EOI at end of write Yes
EOS byte 10
System Controller Yes
I/O Timeout 10 sec
Parallel Poll duration default
Enable Auto Serial Poll No
Enable CIC Protocol No
Assert REN when SC No
CUPE0
Primary Address 7
Secondary Address None
Terminate read on EOS No
Set EOI with EOS on write No
8 bit EOS compare No
Send EOI at end of write Yes
EOS byte 10
I/O Timeout 10 secs
Serial Poll Timeout 1 sec
Enable Repeat Addressing no