TNT and PCiia card settings
GPIB0
Bus Timing 500ns
Cable length for high speed disabled
Primary Address 0
Secondary Address None
Terminate read on EOS Yes
Set EOI with EOS on write Yes
8 bit EOS compare No
Send EOI at end of write Yes
EOS byte 3
System Controller Yes
I/O Timeout 10 sec
Parallel Poll duration default
Enable Auto Serial Poll Yes
Enable CIC Protocol No
Assert REN when SC No
CNTRLW
Primary Address 9
Secondary Address None
Terminate read on EOS Yes
Set EOI with EOS on write Yes
8 bit EOS compare No
Send EOI at end of write Yes
EOS byte 3
I/O Timeout 3 secs
Serial Poll Timeout 3 msec
Enable Repeat Addressing Yes
CNTRLR
Primary Address 8
Secondary Address None
Terminate read on EOS Yes
Set EOI with EOS on write No
8 bit EOS compare No
Send EOI at end of write No
EOS byte 3
I/O Timeout 3 secs
Serial Poll Timeout 1 sec
Enable Repeat Addressing Yes