FrameGrabber_Type - This setting defines the imaging hardware. Note that this is a decimal value.
This setting has these options:
Matrox CronosPlus = 2
Matrox Corona II = 5
IDS Falcon = 201
IDS Eagle = 202
IDS uEye = 203
National Instruments IMAQ = 301
FrameGrabber_CameraType - This setting defines the camera format type. Note that this is a decimal value.
This setting has these options:
NTSCYC = 0
PALYC = 1
NTSC = 2
PAL = 3
CCIR = 4 (monochrome)
CAMERA_USECFGFILE = 101
FrameGrabber_ConfigFile - This setting defines the frame grabber configuration file name. A configuration file name must be specified for camera types of 101.
FrameGrabber_LatchingMode - This setting defines the latching mode for specific systems. An example is a system with an FDC controller, which has hardware that supports the synchronization of an image frame capture and the stage position. For more details, see "Latching". Note that this is a decimal value.
This setting has these options:
No latching = 0
Frame grabber latching (Eagle) = 3
uEye camera latching = 24