This value stores settings for Positive Reporting / Deviation. Settings are stored using 4 bits as follows:
xxx# 1st Bit (0=No X Positive Reporting; 1=X Positive Reporting)
xx#x 2nd Bit (0=No Y Positive Reporting; 1=Y Positive Reporting)
x#xx 3rd Bit (0=No Z Positive Reporting; 1=Z Positive Reporting)
#xxx 4th Bit (0=ALLDATA; 1=DEVONLY)
The following bit sets are used:
0000 = 00: ALLDATA
0001 = 01: ALLDATA; X Positive Reporting
0010 = 02: ALLDATA; Y Positive Reporting
0011 = 03: ALLDATA; X & Y Positive Reporting
0100 = 04: ALLDATA; Z Positive Reporting
0101 = 05: ALLDATA; X and Z Positive Reporting
0110 = 06: ALLDATA; Y and Z Positive Reporting
0111 = 07: ALLDATA; X, Y and Z Positive Reporting
1000 = 08: DEVONLY
1001 = 09: DEVONLY; X Positive Reporting
1010 = 10: DEVONLY; Y Positive Reporting
1011 = 11: DEVONLY; X & Y Positive Reporting
1100 = 12: DEVONLY; Z Positive Reporting
1101 = 13: DEVONLY; X and Z Positive Reporting
1110 = 14: DEVONLY; Y and Z Positive Reporting
1111 = 15: DEVONLY; X, Y and Z Positive Reporting
Entry Name: PosReptInsertToNewPP
Entry Type: Whole Number specifying positive reporting settings. The default value is None (-1).