平度和間隙命令在「編輯」視窗的命令模式下類似於：
FNG2 =FEAT/LASER/FLUSH AND GAP/DEFAULT,CARTESIAN
THEO/<124.012,13.241,0>,<0,0,1>,<1,0,0>,0,7.985
ACTL/<124.012,13.241,0>,<0,0,1>,<1,0,0>,0,7.985
TARG/<124.012,13.241,0>,<0,0,1>
主側點
THEO/<128,13.241,0>,<0,0,1>
ACTL/<0,0,0>,<0,0,0>
量器側點
THEO/<120,13.241,0>,<0,0,1>
ACTL/<0,0,0>,<0,0,0>
剖面向量 <0,1,0>,<0,1,0>
深度 = 1
縮進 = 3
空格 = 1.5
SHOW FEATURE PARAMETERS=NO
SHOW_LASER_PARAMETERS=YES
POINT CLOUD ID=DISABLED
ZOOM=2A,GAIN=NORMAL,OVERLAP=1
OVERSCAN=5
REDUCTION FILTER=OFF
FILTER LINES=Disabled
CLIPPING TOP=100，BOTTOM=0，LEFT=0，RIGHT=100
SOUND=ON
HORIZONTAL CLIPPING=2,VERTICAL CLIPPING=5