球體命令在「編輯」視窗的命令模式下類似於：
SPH1 =FEAT/LASER/SPHERE,CARTESIAN,IN,LEAST_SQR
THEO/<1.895,1.91,1>,<0,0,1>,1.895
ACTL/<1.895,1.91,1>,<0,0,1>,1.895
TARG/<1.895,1.91,1>,<0,0,1>
START ANGLE 1=0,END ANG 1=0
START ANGLE 2=0,END ANG 2=0
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW_LASER_PARAMETERS=YES
POINT CLOUD ID=DISABLED
SENSOR FREQUENCY=25，OVERSCAN=2，EXPOSURE=18
FILTER=NONE