BasicScan objects are created from more generic Command objects to pass information specific to the scan command back and forth. At present only DCC basic scans are user-accessible.

The tables below describes the different combination of Objects that can be used to create and execute a Basic Scan. The Methods will only work with the combination of different of Objects selected from this table (i.e. if you decide to set a method type of BSCANMETH_CIRCLE, then you have to use a Filter type of BSF_DISTANCE etc).

 

Table 1

Method	Filters
BSCANMETH_LINEAR	BSF_DISTANCE BSF_BODYAXISDISTANCE BSF_VARIABLEDISTANCE
BSCANMETH_EDGE	BSF_DISTANCE BSF_VARIABLEDISTANCE
BSCANMETH_CIRCLE	BSF_DISTANCE
BSCANMETH_CYLINDER	BSF_DISTANCE
BSCANMETH_STRAIGHTLINE	BSF_DISTANCE
BSCANMETH_CENTER	BSF_DISTANCE

 

Table 2

Method	NominalMode
BSCANMETH_LINEAR	BSCANNMODE_FINDCADNOMINAL  BSCANNMODE_MASTERDATA
BSCANMETH_EDGE	BSCANNMODE_FINDCADNOMINAL  BSCANNMODE_MASTERDATA
BSCANMETH_CIRCLE	BSCANNMODE_FINDCADNOMINAL  BSCANNMODE_MASTERDATA
BSCANMETH_CYLINDER	BSCANNMODE_FINDCADNOMINAL  BSCANNMODE_MASTERDATA
BSCANMETH_STRAIGHTLINE	BSCANNMODE_FINDCADNOMINAL  BSCANNMODE_MASTERDATA
BSCANMETH_CENTER	BSCANNMODE_FINDCADNOMINAL  BSCANNMODE_MASTERDATA

 

Table 3

Method	OperationMode
BSCANMETH_LINEAR	BSCANOPMODE_REGULARLEARN  BSCANOPMODE_DEFINEPATHFROMHITS   BSCANOPMODE_NORMALEXECUTION
BSCANMETH_EDGE	BSCANOPMODE_REGULARLEARN  BSCANOPMODE_NORMALEXECUTION
BSCANMETH_CIRCLE	BSCANOPMODE_HIGHSPEEDFEATUREBASED BSCANOPMODE_NORMALEXECUTION
BSCANMETH_CYLINDER	BSCANOPMODE_HIGHSPEEDFEATUREBASED BSCANOPMODE_NORMALEXECUTION
BSCANMETH_STRAIGHTLINE	BSCANOPMODE_HIGHSPEEDFEATUREBASED BSCANOPMODE_NORMALEXECUTION
BSCANMETH_CENTER	BSCANOPMODE_REGULARLEARN   BSCANOPMODE_NORMALEXECUTION

 

Table 4

Method	HitType
BSCANMETH_LINEAR	BSCANHIT_VECTOR BSCANHIT_SURFACE
BSCANMETH_EDGE	BSCANHIT_EDGE
BSCANMETH_CIRCLE	BSCANHIT_VECTOR
BSCANMETH_CYLINDER	BSCANHIT_VECTOR
BSCANMETH_STRAIGHTLINE	BSCANHIT_VECTOR
BSCANMETH_CENTER	BSCANHIT_VECTOR

 

Table 5

Method	BoundaryCondition
BSCANMETH_LINEAR	BSBOUNDCOND_SPHENTRY  BSBOUNDCOND_PLANECROSS  BSBOUNDCOND_CYLINDER BSBOUNDCOND_CONE
BSCANMETH_EDGE	BSBOUNDCOND_SPHENTRY  BSBOUNDCOND_PLANECROSS  BSBOUNDCOND_CYLINDER BSBOUNDCOND_CONE
BSCANMETH_CIRCLE	None
BSCANMETH_CYLINDER	None
BSCANMETH_STRAIGHTLINE	None
BSCANMETH_CENTER	None

BasicScan Members  | BasicScanCommand Property