The Wenzel interface is used with Wenzel machines with a Wenzel 2010 controller (Native Wenzel Protocol). This interface just requires a single RS232 comm port; no machine parameter file is needed from the original system.
Before you start PC-DMIS, rename the wenzel.dll to interfac.dll.
The Machine Options dialog box (Edit | Preferences | Machine Interface Setup) has these tabs for the Wenzel interface:
Axis tab
See the "Assigning the Machine Axes" topic.
Debug tab
See the "Generating a Debug File" topic.
Additional information for this interface is provided in the Machine Interface Installation Manual (MIIM).
You can access the MIIM help file from this link: .