Collisions
Problem: PC-DMIS can't place the specified column because there is a collision with another column in the same fixture. If you continue past the warning message, you will be able to graphically see which columns are colliding on the main PC-DMIS graphics window.
Resolution: You need to change the location at which the fixture is held, or change the configuration of the module so that the column is no longer in a collision situation.
Out of Machine Volume
Problem: The fixture will be placed outside of the usable fixture volume. Generally, this means that if the fixture were executed, a portion of it would be placed off of the CMM plate, generate an error during execution, or damage one of the columns or the machine.
Resolution: Change the offsets associated with this fixture. To do this, go to the Machine Orientation area on the Fixture Points tab and change the X offset and/or Y offset.