The following registry entries are available for the Leica interface.
AImToNextPoint = TRUE - This registry entry specifies whether to automatically aim the tracker to the first point of a feature after taking a hit in DCC mode or not.
DelayToStartSendingScanPointsToManualHit - This registry entry specifies the number of milliseconds that the user needs to press the Take-Hit button before automatic feature scanning occurs.
HasCamera - This registry entry specifies if there is a camera in the system. If there is, set the entry to 1. If there is not a camera in the system, set this entry to 0.
HasNivel - This registry entry specifies if there is a nivel in the system. If there is, set this entry to 1. If there is not a nivel in the system, set this entry to 0.
NivelXTilt - This registry entry defines the current X tilt of the nivel. Do NOT set this entry manually. The software sets it after it performs an orient-to-gravity command.
NivelXTolerance - This registry entry defines the X tolerance to warn you when the system is not leveled.
NivelYTilt - This registry entry defines the current Y tilt of the nivel. Do NOT set this entry manually. The software sets it after it performs an orient-to-gravity command.
NivelYTolerance - This registry entry defines the Y tolerance to warn you when the system is not leveled.
QualityFactor = 0 - This registry entry adapts the quality of the data by filtering individual points.
This is done by applying one of these filter settings to the individual data points:
| Leica Recommended Filter Name | From Tol | To Tol | Comment |
Off |
- | - | No filter |
Low |
-0.0100 | 0.0100 | - |
Medium |
-0.0025 | 0.0025 | Leica recommended default setting |
High |
-0.0010 | 0.0010 | - |
RequestInterval = 300 - This registry entry defines in milliseconds how frequent the system updates the readouts.
ScanInterval = 100 - This registry entry specifies in milliseconds how frequent the system takes scan samples.
SecondsToCheckEnvironment - This registry entry specifies in seconds how often the system reads the weather monitor.
SecondsToCheckGravity - This registry entry specifies in seconds how often the system reads the nivel.
TrackerIPAddress = 192.168.0.1
TrackerPort = 700
Vector Distance - This registry entry defines the distance for the pulled-away vector.
WeatherMonitor - This registry entry defines the options to use for a weather monitor. If you do not use a weather monitor, set this entry to 0. To read and automatically set refraction, set this entry to 2.