ProbeQualVisionIlluminationCalPreFrameDelay

Sets an added delay in milliseconds between when the illumination is set to 0 or 100%, as is done at start of the calibration segment for each magnification, and when the camera frame is measured. This value is added to a minimum value of 200ms and can be especially important on older systems which use incandescent illumination.

Increase this value if the calibration sequence appears to progress before the illumination stabilizes.

Entry Name: ProbeQualVisionIlluminationCalPreFrameDelay

Entry Type: Accepts integer values greater than or equal to 0 (zero). The default value is 0 (zero).