This registry entry specifies the COM port that is used to establish a serial connection between your PC-DMIS computer and your Valisys server. Use a value of 1 for COM1, 2 for COM2, etc. The protocol for the port will automatically be set to 9600 baud, 8 data bits, no parity, 1 stop bit. The Valisys host must be configured to use the same protocol settings.
When a serial port is being used, there should not be a value for ValisysTCPIPPort.
Entry Name: ValisysCommPort
Entry Type: Whole Number to specify the COM port. The default value is 0.