Thickness Gage

The Thickness Gage command calculates and reports a 2D thickness and gage position.

The Thickness Gage command requires a primary and a secondary feature since PC-DMIS determines the thickness by piercing the secondary feature normal to a primary feature gage point. When you create a Thickness Gage command, the software only shows the valid features to select from in the Thickness Gage dialog box.

The Thickness Gage command only supports these feature types:

• Thickness Scan

• Linear Scan

• Profile 2D

You can use the Linear scan and the Profile 2D in any combination. However, you can only use the Thickness scan by itself since it contains data for two surfaces.

To create a Thickness Gage command:

1. Create your primary and secondary features.

2. Select Insert | Gage | Thickness to open the Thickness Gage dialog box.

Thickness Gage dialog box

3. Select the primary and secondary features from the respective Primary Feature and Secondary Feature lists. The software populates the list items based on the surface or cut vector of the current alignment.

4. Select the Gage Axis and define your Point of Interest (POI). For details, see "Point of Interest (POI) Definition and Reporting".

5. To add the Thickness Gage to your report, click the Report Max/Min button.

6. Click Create to create the Thickness Gage.

Once you create the Thickness Gage command, the software adds the selected dimensions for the command in the Edit window:

Example of the Thickness Gage command in the Edit window

More:

Point of Interest (POI) Definition and Reporting