The auto circle command in the Edit window in Command mode looks like this:
CIR2 =FEAT/LASER/CIRCLE,CARTESIAN
THEO/<1.895,1.91,1>,<0,0,1>,1.895
ACTL/<1.895,1.91,1>,<0,0,1>,1.895
TARG/<1.895,1.91,1>,<0,0,1>
ANGLE VEC=<0,0,1>
DEPTH=3
SHOW FEATURE PARAMETERS=YES
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW_LASER_PARAMETERS=YES
POINT CLOUD ID=DISABLED
SENSOR FREQUENCY=25,OVERSCAN=2,EXPOSURE=18
FILTER=NONE