The Flush and Gap command inside the Edit window’s Command Mode looks like this:
FNG2 =FEAT/LASER/FLUSH AND GAP/DEFAULT,CARTESIAN
THEO/<124.012,13.241,0>,<0,0,1>,<1,0,0>,0,7.985
ACTL/<124.012,13.241,0>,<0,0,1>,<1,0,0>,0,7.985
TARG/<124.012,13.241,0>,<0,0,1>
MASTER SIDE POINT
THEO/<128,13.241,0>,<0,0,1>
ACTL/<0,0,0>,<0,0,0>
GAUGE SIDE POINT
THEO/<120,13.241,0>,<0,0,1>
ACTL/<0,0,0>,<0,0,0>
CUT PLANE VECTOR<0,1,0>,<0,1,0>
Depth=1
INDENT=3
SPACER=1.5
SHOW FEATURE PARAMETERS=NO
SHOW_LASER_PARAMETERS=YES
POINT CLOUD ID=DISABLED
ZOOM=2A,GAIN=NORMAL,OVERLAP=1
OVERSCAN=5
REDUCTION FILTER=OFF
FILTER LINES=Disabled
CLIPPING TOP=100,BOTTOM=0,LEFT=0,RIGHT=100
SOUND=ON
HORIZONTAL CLIPPING=2,VERTICAL CLIPPING=5