GPIB0
Parameter |
Setting |
Bus Timing |
500 ns |
Cable Length for High Speed |
Disabled |
Primary Address |
0 |
Secondary Address |
None |
Terminate Read on EOS |
Yes |
Set EOI with EOS on Write |
Yes |
8 Bit EOS Compare |
No |
Send EOI at End of Write |
Yes |
EOS Byte |
10 |
System Controller |
Yes |
I/O Time-out |
10 sec |
Parallel Poll Duration |
Default |
Enable Auto Serial Poll |
No |
Enable CIC Protocol |
No |
Assert REN when SC |
No |
ZEISS0
Parameter |
Setting |
Primary Address |
8 |
Secondary Address |
None |
Terminate Read on EOS |
Yes |
Set EOI with EOS on Write |
Yes |
8 Bit EOS Compare |
No |
Send EOI at End of Write |
Yes |
EOS Byte |
3 |
I/O Time-out |
10 secs |
Serial Poll Time-out |
1 sec |
Enable Repeat Addressing |
No |
ZEISS1
Parameter |
Setting |
Primary Address |
9 |
Secondary Address |
None |
Terminate Read on EOS |
Yes |
Set EOI with EOS on Write |
Yes |
8 Bit EOS Compare |
No |
Send EOI at End of Write |
Yes |
EOS Byte |
10 |
I/O Time-out |
10 secs |
Serial Poll Time-out |
1 sec |
Enable Repeat Addressing |
No |