Version |
Description |
1.110 |
driver_special_learnmode_option added, with condit. For PC-DMIS v4.2 and later plus error handling for APC PR245311. |
1.109 |
Handling of error 23 (FOLLOWING [?LAG?]) PR240265. |
1.108 |
Adjustable time delay after probe rotationWaitAfterPhRotation. The default value is 200 (ms). |
1.107 |
Anders recommends avoiding HARD reset. All resets sent are now soft resets. |
1.106 |
PR232281 blocking MANMES/RESET when commands are still executed. |
1.105 |
Check for PR230553 (no probe noticed) but fixed WaitEnd blocking MANMES when switching to manual mode after head movement. |
1.104 |
Check for PR229496 - Send probe pin data executed on each DCC Move or Measure command. |
1.103 |
PR#228851 + not depending anymore on APC results query. Added ForceAPCPresence in the registry. |
1.102 |
MANMES sent correctly when switching from DCC mode. NoResetOnManStop registry to avoid numerous resets. |
1.101 |
Goto manual ignored in change tool check of coordinate system before a measure PR # 223740. |
1.100 |
VolComp support added as per # 223278. |
1.090 |
Made sure MANMES is sent after a hit since setting to jog won't for it now #222480. |
1.089 |
RESET SOFT on Error necessary for Find Hole option #221891 |
1.088 |
PC answer allows or not the send of CHANGE1 / CHANGE0 + #221668. WaitReset time now in the registry. |
1.087 |
Prehit and Retract now converted from inches! #221567 |
1.086 |
MANMES logic changed #219220 |
1.085 |
Wait for QuitWait ms after bQuitSent received #218600. |
1.084 |
If CHANGING 0 not allowed, do not send CHANGING 1 either |
1.083 |
Fixed #218599 and 218600. |
1.082 |
Internal version. |
1.081 |
Internal version. |
1.080 |
Joystick part coordinate system available. #215278. |
1.074 |
MANUAL/DCC wait reduced. VB offset calculation program added. Needs Proto v2.5.0 release, or later. |
1.073 |
Internal version. |
1.072 |
Internal version. Timing issues for PH10 Operation |
1.071 |
Corrected "PH9 won't reset to 0 at startup!" |
1.070 |
Buttons can send position, plus better handling of buttons Plus better PH9 error handling (Bug fixes: 215181, 215543, and 215277) |
1.060 |
Fixed bug 215924 in driver_measure_point. |
1.051 |
Internal version. |
1.050 |
Offsets transmitted at the PH9 move, for Proto VolComp. |
1.045 |
Added map offsets, probe offsets sent real time, and change in MANMES rules of game. Handling of Stop via a reset soft added. |
1.044 |
INI SETTINGS review, for new registry format. |
1.043 |
INIT variable (nChanging_0_Enabled) to prevent sending CHANGING 0 (On some controllers!). Added detection of Ruby type for the same reason. |
1.042 |
Send RESETSCALE if machine type is incremental. Start Proto only if communication fails. |
1.041 |
In manual mode, set global_commanded_position to last reading. |
1.040 |
Fixed ACR3 calibration and tool-changers problem after working with Tobias. |
1.032 |
ResetController better handling. Also, fixed bug for ACR3. |
1.031 |
Take out LastVector in store_point when in DCC mode (see "CNCMES"). |
1.030 |
Various changes start Proto (location in INI/Registry) by PC-DMIS, user-assignable keys for "p-button" key and "send" key, default TEMPCOMP=TRUE. Fixed bug for improper termination. |
1.024 |
Better "RESET" handling. |
1.021 |
Unicode conversion. |
1.020 |
Communication through Proto. |
1.010 |
Added VolComp support (with VolCompclass). |
1.000 |
Initial Release (single-command mode). |