To test the lights in a terminal for the PWM protocol, see "Testing the Lights in a Terminal".
ASCII Code |
Keyboard Key |
Action |
49 |
1 |
Shows a blue hue (on both X and Z): Machine Idle. Not homed. |
50 |
2 |
Makes lights all white on X and Z: Once homed, blue changes to white (on both X and Z). Close the PC-DMIS measurement routine. Once the error condition is remedied, open a new PC-DMIS measurement routine. |
51 |
3 |
Makes Z lights flash green while X lights stays white: Start a PC-DMIS measurement routine. |
52 |
4 |
Changes X and Z lights to solid green. The PC-DMIS measurement routine is finished. All features are in tolerance. |
53 |
5 |
Changes X and Z lights to solid red: The PC-DMIS measurement routine finishes. At least one feature is out of tolerance. |
54 |
6 |
Makes both X and Z lights to flash red: An error condition is encountered during execution. |
55 |
7 |
Makes the LED fading speed 1 (fastest) |
56 |
8 |
Makes the LED fading speed 2 |
57 |
9 |
Makes the LED fading speed 3 |
48 |
0 |
Makes the LED fading speed 4 (default) |
45 |
- |
Makes the LED fading speed 5 |
61 |
= |
Makes the LED fading speed 6 (slowest) |
113 |
q |
Makes light 1 red |
119 |
w |
Makes light 2 red |
101 |
e |
Makes light 1 green |
114 |
r |
Makes light 2 green |
116 |
t |
Makes light 1 blue |
121 |
y |
Makes light 2 blue |
117 |
u |
Makes light 1 white |
105 |
i |
Makes light 2 white |
111 |
o |
Makes light 1 yellow |
112 |
p |
Makes light 2 yellow |
97 |
a |
Makes light 1 purple |
115 |
s |
Makes light 2 purple |
100 |
d |
Makes light 1 cyan |
102 |
f |
Makes light 2 cyan |
103 |
g |
Makes light 1 hex color1 |
104 |
h |
Makes light 2 hex color1 |
106 |
j |
Makes light 1 hex color2 |
107 |
k |
Makes light 2 hex color2 |
108 |
l |
Makes light 1 hex color 3 |
59 |
; |
Makes light 2 hex color 3 |
122 |
z |
Makes light 1 turn OFF |
120 |
x |
Makes light 2 turn OFF |
99 |
c |
Sets 0 lights flashing |
118 |
v |
Sets 1st light flashing only |
98 |
b |
Sets 2nd light flashing only |
110 |
n |
Sets both lights flashing |