This registry entry determines how the software applies the thickness distance from "DccThicknessDistance".
0 - Use this option (Adjust Theoretical) when you need to adjust the theoretical values by a thickness because the software performs the measurements on the opposite side of the material.
1 - Use this option (Adjust Actual) when the software adjusts the measurements by the thickness back to the original theoretical XYZ locations. With this option, it appears that the theoretical and measured values have not been offset, and the target is offset. You still need to modify your target so that PC-DMIS drives to the correct location.
2 - Use this option (Adjust None) if you don't need to apply the thickness.
Entry Name: DccThicknessIsActual
Entry Type: Whole Number to specify the thickness option. You can type 0, 1, or 2. The default value is 0.