These values determine whether the specified option is displayed as part of a Dimension command. The option displays when the value is TRUE (1).
Entry Name: DimInfo(option)Default
Entry Type: Whole number that specifies TRUE (1) or FALSE (0). The default value is 0.
Option Key
Option |
Description |
Auto |
Toggles whether PC-DMIS will automatically determine the information that is displayed as part of dimension commands. The following information is displayed when this value is TRUE (1): Measured, Nominal, Tolerances, Deviation, MaxMin, OutTol. |
Deviation |
Deviation of the measured value from the nominal |
GraphOption |
Toggles whether a graph will be displayed in the Dimension Info box in the Graphic Display window. |
LocA |
Location Angle (for cones) |
LocD |
Location Diameter |
LocF |
Location Integrated Form Dimension |
LocH |
Location Height |
LocL |
Location Length (used for cylinders, slots, cones, and ellipses) |
LocPA |
Location Polar Angle |
LocPD |
Location Diameter of a Circle (perpendicular to the pin vector) |
LocPR |
Location Polar Radius |
LocR |
Location Radius |
LocRS |
Location Deviation along a surface report |
LocRT |
Location Deviation along the Report vector |
LocS |
Location Deviation along the Surface vector |
LocT |
Location Error along approach vector (for points on curved surfaces) |
LocUseDimAxes |
Uses the axes that were previously defined in the dimension's dialog box for Location Dimensions |
LocV |
Location Vector |
LocWorst |
Uses the axis that gives the worst out of tolerance condition for Location Dimensions. |
LocX |
Location X Axis |
LocY |
Location Y Axis |
LocZ |
Location Z Axis |
Maxmin |
Maximum and minimum values for the dimension |
Mean |
Average of all the deviations for the dimension |
Measured |
Actual measured dimensions |
Nominal |
Theoretical values for the dimension |
Numpoints |
Number of points used to measure the feature of the dimension |
Outtol |
Out of tolerance measured value from the nominal and tolerance values |
ShowDimID |
Toggles the ability to display the ID for the dimension within the Graphic Display window |
ShowFeatID |
Toggles the ability to display the ID for the feature whose dimensions are being measured |
ShowHeadingsID |
Toggles the display of row and column headings in the Dimension Info box |
Stddev |
Standard deviation of all the deviations for the dimension |
Tolerance |
Acceptable tolerance levels either greater than or less than the nominal |
TPD1 |
True Position diameter/width value of the first datum |
TPD2 |
True Position diameter/width value of the second datum |
TPD3 |
True Position diameter/width value of the third datum |
TPDF |
True Position diameter of Feature |
TPForm |
True Position integrated form dimension for the feature |
TPPA |
True Position polar angle |
TPPR |
True Position polar radius |
TPTP |
True Position Tolerance |
TPUseDimAxes |
Uses the axes that were previously defined in the dimension's dialog box for True Position |
TPWorst |
Uses the axis that gives the worst out of tolerance condition for True Position |
TPX |
True Position X Axis |
TPY |
True Position Y Axis |
TPZ |
True Position Z Axis |