These values determine the order that the specified option is displayed as part of a Dimension command.
Entry Name: DimInfo(option)OrderDefault
Entry Type: Whole number that specifies the order. The default value is 0.
Options Key
Option |
Description |
Deviation |
Deviation of the measured value from the nominal |
LocA |
Location Angle (for cones) |
LocD |
Location Diameter |
LocF |
Location Integrated Form Dimension |
LocH |
Location Height |
LocL |
Location Length (used for cylinders, slots, cones, and ellipses) |
LocPA |
Location Polar Angle |
LocPD |
Location Diameter of a Circle (perpendicular to the pin vector) |
LocPR |
Location Polar Radius |
LocR |
Location Radius |
LocRS |
Location Deviation along a surface report |
LocRT |
Location Deviation along the Report vector |
LocS |
Location Deviation along the Surface vector |
LocT |
Location Error along approach vector (for points on curved surfaces) |
LocV |
Location Vector |
LocX |
Location X Axis |
LocY |
Location Y Axis |
LocZ |
Location Z Axis |
Maxmin |
Maximum and minimum values for the dimension |
Mean |
Average of all the deviations for the dimension |
Measured |
Actual measured dimensions |
Nominal |
Theoretical values for the dimension |
Numpoints |
Number of points used to measure the feature of the dimension |
Outtol |
Out of tolerance measured value from the nominal and tolerance values |
Stddev |
Standard deviation of all the deviations for the dimension |
Tolerance |
Acceptable tolerance levels either greater than or less than the nominal |
TPD1 |
True Position diameter/width value of the first datum |
TPD2 |
True Position diameter/width value of the second datum |
TPD3 |
True Position diameter/width value of the third datum |
TPDF |
True Position diameter of Feature |
TPForm |
True Position integrated form dimension for the feature |
TPPA |
True Position polar angle |
TPPR |
True Position polar radius |
TPTP |
True Position Tolerance |
TPX |
True Position X Axis |
TPY |
True Position Y Axis |
TPZ |
True Position Z Axis |