You can program a Profile 2D feature by double-clicking near the edge of the feature in the Vision tab. PC-DMIS Vision automatically traces around the edge of the feature and moves the machine stage on a DCC machine if necessary.
Rules for Clicks to Start Edge Tracer
If you just double-click, PC-DMIS Vision travels around the edge in a counterclockwise direction to try and return to the start position.
If you single click a point before double-clicking, that first-clicked point is your start point, and the double-click point is your targeted end point.
If you click two points before double-clicking, the first click is the start point, and the second click dictates the direction in which the trace proceeds. The double-click position is also the end point.
Once the edge trace is completed, you can adjust the nominal segments as necessary.