Updates

Version

Description

1.110

driver_special_learnmode_option added, with condit. For PC-DMIS v4.2 and later plus error handling for APC PR245311.

1.109

Handling of error 23 (FOLLOWING [?LAG?]) PR240265.

1.108

Adjustable time delay after probe rotationWaitAfterPhRotation. The default value is 200 (ms).

1.107

Anders recommends avoiding HARD reset. All resets sent are now soft resets.

1.106

PR232281 blocking MANMES/RESET when commands are still executed.

1.105

Check for PR230553 (no probe noticed) but fixed WaitEnd blocking MANMES when switching to manual mode after head movement.

1.104

Check for PR229496 - Send probe pin data executed on each DCC Move or Measure command.

1.103

PR#228851 + not depending anymore on APC results query.

Added ForceAPCPresence in the registry.

1.102

MANMES sent correctly when switching from DCC mode.

NoResetOnManStop registry to avoid numerous resets.

1.101

Goto manual ignored in change probe check of coordinate system before a measure PR # 223740.

1.100

VolComp support added as per # 223278.

1.090

Made sure MANMES is sent after a hit since setting to jog won't for it now #222480.

1.089

RESET SOFT on Error necessary for Find Hole option #221891

1.088

PC answer allows or not the send of CHANGE1 / CHANGE0 + #221668.

WaitReset time now in the registry.

1.087

Prehit and Retract now converted from inches! #221567

1.086

MANMES logic changed #219220

1.085

Wait for QuitWait ms after bQuitSent received #218600.

1.084

If CHANGING 0 not allowed, do not send CHANGING 1 either

1.083

Fixed #218599 and 218600.

1.082

Internal version.

1.081

Internal version.

1.080

Joystick part coordinate system available. #215278.

1.074

MANUAL/DCC wait reduced.

VB offset calculation program added.

Needs Proto v2.5.0 release, or later.

1.073

Internal version.

1.072

Internal version. Timing issues for PH10 Operation

1.071

Corrected "PH9 won't reset to 0 at startup!"

1.070

Buttons can send position, plus better handling of buttons

Plus better PH9 error handling (Bug fixes: 215181, 215543, and 215277)

1.060

Fixed bug 215924 in driver_measure_point.

1.051

Internal version.

1.050

Offsets transmitted at the PH9 move, for Proto VolComp.

1.045

Added map offsets, probe offsets sent real time, and change in MANMES rules of game.

Handling of Stop via a reset soft added.

1.044

INI SETTINGS review, for new registry format.

1.043

INIT variable (nChanging_0_Enabled) to prevent sending CHANGING 0 (On some controllers!).

Added detection of Ruby type for the same reason.

1.042

Send RESETSCALE if machine type is incremental. Start Proto only if communication fails.

1.041

In manual mode, set global_commanded_position to last ­ reading.

1.040

Fixed ACR3 calibration and probe changers problem after working with Tobias.

1.032

ResetController better handling.

Also, fixed bug for ACR3.

1.031

Take out LastVector in store_point when in DCC mode (see "CNCMES").

1.030

Various changes start Proto (location in INI/Registry) by PC-DMIS, user-assignable keys for "p-button" key and "send" key, default TEMPCOMP = True.

Fixed bug for improper termination.

1.024

Better "RESET" handling.

1.021

Unicode conversion.

1.020

Communication through Proto.

1.010

Added VolComp support (with VolCompclass).

1.000

Initial Release (single-command mode).