Public Methods
 GetTool | This method returns a tool object. |
| SetTool | Required expression that evaluates to a QualificationSettings object. |
Public Properties
 CreateReplaceMap | This determines whether or not a map should be created or replaced. Read/Write. |
| EndA | This determines the ending A angle to use during qualification. |
| EndAngle | This determines the End Angle to use on the qualification tool. |
| EndB | This determines the ending B angle to use during qualification. |
| EndC | C Angle End Value |
| ExecuteMode | This determines the type of calibration action to take. |
| IncrementA | This determines the angle increment to use for the A angle during qualification. |
| IncrementB | This determines the angle increment to for the B angle during qualification. |
| IncrementC | C Angle Increment Value |
| Mode | This determines the Calibration Mode. Either DCC or Manual. |
| MoveSpeed | This determines the speed the probe moves during calibration. |
| NumHits | This determines the number of hits to take around the calibration tool. |
| NumLevels | This determines the number of levels that to use in the calibration process. PC-DMIS divides the number of hits by the number of levels to determine how many hits will be taken on each level of the qualification tool. |
| PHSAPriority | This indicates whether angle A or B for a PHS system receives priority during the calibration process. TRUE means Angle A gets priority. FALSE means Angle B gets priority. |
| PHSTol | For PHS systems, this determines the PHS tolerance value. |
| PreHit | This determines the Prehit distance to use during calibration. |
| ShankCheck | This determines whether or not you'll calibrate the shank of the probe as well. |
| ShankHits | This determines the number of hits used to measure the shank. |
| ShankOffset | Shank Offset for calibration |
| StartA | This determines the starting A angle to use during qualification. |
| StartAngle | This determines the Start Angle to use on the qualification tool. |
| StartB | This determines the starting B angle to use during qualification. |
| StartC | C Angle Start Value |
| ToolMoved | This indicates whether a tool has moved or not or if the user should be asked. |
| ToolOnRotaryTable | This indicates whether or not the tool is located on a rotary table. |
| ToolOverideI | This determines the I value for the Tool Override's IJK vector. |
| ToolOverideJ | This determines the J value for the Tool Override's IJK vector. |
| ToolOverideK | This determines the K value for the Tool Override's IJK vector. |
| Touchspeed | This determines the Touch Speed to use during calibration. |
| UserDefinedCalibrationMode | This determines whether End Angle, Start Angle, and NumLevels are used in the calibration process, or if they're ignored. |
| UserDefinedCalibrationOrder | This determines whether or not the calibration order is user defined. |