Public Methods
 AddAxes | Add default location axes for End Location command |
| Evaluate | Evaluates a dimension’s data from its feature data. |
| GetProfilePointInfos | Returns all Point Info specified by InfoType |
| GetReferencedFeature | Dimensions use one or more input features in their calculations. This method returns the Command object for the referenced input feature. |
Public Properties
 Angle | Represents the theoretical angle of a DIMENSION_ANGULARITY dimension. |
| Angle2DSupplemental | Read/Write: (BOOL) m_supplemental on 2D Angle Dimension |
| Angle2DToFrom | Read/Write: (int) m_tofrom on 2D Angle Dimension |
| ArrowMultiplier | Multiplier for display arrows of dimension. |
| AXIS | Axis used with dimension. Possible values include the following: DIMAXIS_NONE DIMAXIS_XAXIS DIMAXIS_YAXIS DIMAXIS_ZAXIS |
| AxisLetter | Axis letter used to describe the axis or type of the dimension. |
| Bonus | Returns the bonus tolerance of a true position dimension. |
| Datum1 | Read/Write: First datum feature |
| Datum1Modifier | Read/Write: First datum material condition |
| DATUM2 | Read/Write: Second datum feature |
| Datum2Modifier | Read/Write: Second datum material condition |
| Datum3 | Read/Write: Third datum feature |
| Datum3Modifier | Read/Write: Third datum material condition |
| DevAngle | Returns the deviation angle of a dimension. |
| Deviation | Returns the deviation of a dimension. |
| DimensionModifier | Read/Write: Dimension material condition |
| Feat1 | Returns the ID of the first feature associated with a dimension. |
| Feat2 | Returns the ID of the second feature associated with a dimension. |
| Feat3 | Returns the ID of the second feature associated with a dimension. |
| GraphicalAnalysis | Flag indicating whether graphical analysis is ON for the dimension. |
| ID | Returns the ID of a dimension. |
| IsLocationAxis | Determines whether or not the axis is a Location axis. |
| IsProfileDimension | Read Only: Indicates whether the dimension is Profile Dimension |
| IsTruePosAxis | Determines whether or not the axis is a Location axis. |
| Length | Returns the length associated with a dimension. |
| Max | Returns the maximum value of a dimension. |
| Measured | Returns the measured value of a dimension. |
| Min | Returns the minimum value of a dimension. |
| Minus | Represents the negative tolerance of a dimension. |
| NOMINAL | Returns the nominal associated with a dimension. |
| OutputMode | Output mode of the dimension. Possible values include the following: DIMOUTPUT_STATS DIMOUTPUT_REPORT DIMOUTPUT_BOTH |
| OutTol | Returns the out-of-tolerance value of a dimension. |
| ParallelPerpendicular | Indicates whether calculations are performed parallel or perpendicular to input for 2-D dimensions. Possible values include the following: DIM_PERPINDICULAR DIM_PARALLEL |
| Parent | Read Only: Returns Parent Command Object |
| Plus | Returns the positive tolerance of a dimension. Read-only Double. |
| Profile | This represents an enumerated value indicating what type of profile should be used. Possible values include the following: DIM_PROF_FORM_ONLY DIM_PROF_FORM_AND_LOCATION |
| ProfilePointInfoCount | Read Only: Returns the number of Point Info of Profile Dimension |
| RadiusType | Radius calculation type used with true position dimensions. Possible values include the following: DIM_NO_RADIUS DIM_ADD_RADIUS DIM_SUB_RADIUS |
| TextualAnalysis | Flag indicating whether textual analysis is ON for the dimension. |
| TruePositionDatumModifier | Read/Write: Position material condition |
| TruePositionModifier | Enumeration value indicating material conditions that should be used to calculate possible bonus tolerances. Possible values include the following: DIM_RFS_RFS DIM_RFS_MMC DIM_RFS_LMC DIM_MMC_RFS DIM_MMC_MMC DIM_MMC_LMC DIM_LMC_RFS DIM_LMC_MMC DIM_LMC_LMC |
| TruePosUseAxis | Enumeration value indicating axis type to use with true position dimension. Possible values include the following: DIM_AXIS_AVERAGE DIM_AXIS_START_POINT DIM_AXIS_END_POINT |
| Units | Unit type in use by dimension. Possible values include the following: INCH MM (for millimeters) |