These values determine whether the specified option is displayed as part of a Dimension command. The option displays when the value is 1.
Entry Name: DimInfo(option)Default
Entry Type: Whole number that specifies TRUE (1) or FALSE (0). The default value is 0.
Option Key
Option |
Description |
DimInfoAutoDefault |
Toggles whether PC-DMIS will automatically determine the information that is displayed as part of dimension commands. The following information is displayed when this registry entry is 1: Measured, Nominal, Tolerances, Deviation, MaxMin, OutTol. |
DimInfoDeviationDefault |
Deviation of the measured value from the nominal |
DimInfoGraphOptionDefault |
Toggles whether a graph will be displayed in the Dimension Info box in the Graphic Display window. |
DimInfoLocADefault |
Location Angle (for cones) |
DimInfoLocDDefault |
Location Diameter |
DimInfoLocFDefault |
Location Integrated Form Dimension |
DimInfoLocHDefault |
Location Height |
DimInfoLocLDefault |
Location Length (used for cylinders, slots, cones, and ellipses) |
DimInfoLocPADefault |
Location Polar Angle |
DimInfoLocPDDefault |
Location Diameter of a Circle (perpendicular to the pin vector) |
DimInfoLocPRDefault |
Location Polar Radius |
DimInfoLocRDefault |
Location Radius |
DimInfoLocRSDefault |
Location Deviation along a surface report |
DimInfoLocRTDefault |
Location Deviation along the Report vector |
DimInfoLocSDefault |
Location Deviation along the Surface vector |
DimInfoLocTDefault |
Location Error along approach vector (for points on curved surfaces) |
DimInfoLocUseDimAxesDefault |
Uses the axes that were previously defined in the dimension's dialog box for Location Dimensions |
DimInfoLocVDefault |
Location Vector |
DimInfoLocWorstDefault |
Uses the axis that gives the worst out of tolerance condition for Location Dimensions. |
DimInfoLocXDefault |
Location X Axis |
DimInfoLocYDefault |
Location Y Axis |
DimInfoLocZDefault |
Location Z Axis |
DimInfoMaxminDefault |
Maximum and minimum values for the dimension |
DimInfoMeanDefault |
Average of all the deviations for the dimension |
DimInfoMeasuredDefault |
Actual measured dimensions |
DimInfoNominalDefault |
Theoretical values for the dimension |
DimInfoNumpointsDefault |
Number of points used to measure the feature of the dimension |
DimInfoOuttolDefault |
Out of tolerance measured value from the nominal and tolerance values |
DimInfoShowDimIDDefault |
Toggles the ability to display the ID for the dimension within the Graphic Display window |
DimInfoShowFeatIDDefault |
Toggles the ability to display the ID for the feature whose dimensions are being measured |
DimInfoShowHeadingsIDDefault |
Toggles the display of row and column headings in the Dimension Info box |
DimInfoStddevDefault |
Standard deviation of all the deviations for the dimension |
DimInfoToleranceDefault |
Acceptable tolerance levels either greater than or less than the nominal |
DimInfoTPD1Default |
True Position diameter/width value of the first datum |
DimInfoTPD2Default |
True Position diameter/width value of the second datum |
DimInfoTPD3Default |
True Position diameter/width value of the third datum |
DimInfoTPDFDefault |
True Position diameter of Feature |
DimInfoTPFormDefault |
True Position integrated form dimension for the feature |
DimInfoTPPADefault |
True Position polar angle |
DimInfoTPPRDefault |
True Position polar radius |
DimInfoTPTPDefault |
True Position Tolerance |
DimInfoTPUseDimAxesDefault |
Uses the axes that were previously defined in the dimension's dialog box for True Position |
DimInfoTPWorstDefault |
Uses the axis that gives the worst out of tolerance condition for True Position |
DimInfoTPXDefault |
True Position X Axis |
DimInfoTPYDefault |
True Position Y Axis |
DimInfoTPZDefault |
True Position Z Axis |