This offset value provides the length distance that is applied to a calibrated port location of various tool changers, which are specified in the "Tool Changers" sub-heading below. This adjusts the port location right or left relative to the tool changer if you are directly in front of it.
If you use a negative value, PC-DMIS adjusts the calibrated port location to the left by the given distance.
If you use a positive value, PC-DMIS adjusts the calibrated port location to the right by the given distance.
Since you can place tool changers on the machine in varying orientations with respect to the machine's axes, adjustments made to the calibration are relevant to the tool changer's own coordinates and not the machine's axes.
Entry Name: TCFinalAdjustLength(toolchanger)
Entry Type: Real Number that specifies the length adjustment distance. The default value is 0.
Tool Changers
FCR25SM25
FCR25TM25
HR-MP
HR-MS
HR-X1
LSPX1 (Deprecated)
LSPX1C (Deprecated)
LSPX1H (Deprecated)
LSPX1SF (Deprecated)
PMM
SCP600
SCP80
SP600
TESASTAR-PR
TP20
TP200
TRAVELRACKX1V