The Deviation Symbols check box shows the deviation within the set range. If the out of tolerance range is high, PC-DMIS will indicate the deviation using the "greater than" symbol (>) on the right side of the line. If the out of tolerance range is low, PC-DMIS indicates the deviation using the "less than" symbol (<).
For example:
Nominal = 0.00
Measured = 0.02
Positive Tolerance = 0.10
Negative Tolerance = 0.20
Total Tolerance Range = (.10 - (-.20)) = .30
Percentage = 100*(.02 - (-.20))/.3 = 73.3 %
- - - - - - # - - looks at the % and shifts based on the
%.
DIM D1= LOCATION OF CIR F5 GRAPH=OFF TEXT=OFF MULT=1.00
AX |
NOM |
+TOL |
-TOL |
MEAS |
DEV |
OUT-TOL |
|
x |
5.0000 |
0.0100 |
0.0100 |
5.0000 |
0.0000 |
0.0000 |
----#---- |
y |
2.0000 |
0.0100 |
0.0100 |
2.0000 |
0.0000 |
0.0000 |
----#---- |
z |
-0.2500 |
0.0100 |
0.0100 |
-0.2500 |
0.0000 |
0.0000 |
----#---- |
d |
2.0000 |
0.0100 |
0.0100 |
2.0000 |
0.0000 |
0.0000 |
|
v |
i |
j |
k |
END OF DIMENSION D1