The value for this setting is a parameter which you can use for the listed probe types. For details on this setting, see the general version of this setting ("ProbeLowerForce").
Entry Name: ProbeLowerForce_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
Entry Type: Real Number specified in MM. The default values for each probe type are listed below.
List of Default Values
| Probe Type | Default Value |
| LSPX1C | 0.019 |
| LSPX1H | 0.019 |
| LSPX1M | 0.0096 |
| LSPX1S | 0.019 |
| LSPX3 | 0.04 |
| LSPX5 | 0.04 |
| SP25 | 0.025 |
| SP600 | 0.06 |
| SP80 | 0.04 |