This entry determines the method that will be used for temperature compensation.
Entry Name: TempCompAutomatic
Entry Type: Whole number that specifies the compensation method. The default value is 0.
Following are the available compensation methods and their respective processes in PC-DMIS.
Value |
Method |
Process |
0 |
Manual |
Compensation is manual. |
1 |
Read Temperatures from Controller |
PC-DMIS reads the current temperatures from the controller automatically rather than you supplying the data. |
2 |
Controller Compensates Axes Only |
The controller performs compensation of the machine axes itself. |
3 |
Controller Comps Axes and Part |
The controller performs compensation of both the machine axes and the part. |