Before you install PC-DMIS, configure your portlock or LMS license for the HP-C-Ve / HP-C-T interface. When you have the correct PC-DMIS license configured for the interface, it ensures the correct files and entries are set up when you install PC-DMIS.
The HP-C-Ve interface requires these license options:
Vision enabled
PCD_VisionInterface.CMMVDcc (LMS) or CMM-V DCC vision type (HASP)
Leitz/FDC interface enabled
The HP-C-T interface requires these license options:
Vision enabled
PCD_VisionInterface.CMMVDcc (LMS) or CMM-V DCC vision type (HASP)
FDC interface enabled
The HP-L interface/sensor requires these license options:
Laser enabled
CMS Laser type
The HP-OW interface/sensor requires these license options:
Laser enabled
Mycrona WLS Laser type
HP-L and HP-OW cannot currently be configured on the same system.
HP-OW is only supported by the FDC interface.
If configured correctly, the PC-DMIS installation renames the following files:
HSI_CMM.dll to HSI.dll
HexMSI.dll to Interfac.dll
Leitz.dll or FDC.dll to InterfacHelper.dll
You can also manually rename these files.
The PC-DMIS installation assumes that the Frame Grabber has already been successfully installed. For details on Frame Grabber installation and setup, see "PC-DMIS Vision Frame Grabber and Camera Setup".