These are the available entries for this interface:
AimToNextPoint = True - This entry specifies whether to automatically aim the tracker to the first point of a feature after taking a hit in DCC mode or not.
DelayToStartSendingScanPointsToManualHit - This entry specifies the number of milliseconds that the user needs to press the Take-Hit button before automatic feature scanning occurs.
HasCamera - This entry specifies if there is a camera in the system. If there is, set the entry to 1. If there is not a camera in the system, set this entry to 0.
HasNivel - This entry specifies if there is a Nivel in the system. If there is, set this entry to 1. If there is not a Nivel in the system, set this entry to 0.
NivelXTilt - This entry defines the current X tilt of the Nivel. Do NOT set this entry manually. The software sets it after it performs an orient-to-gravity command.
NivelXTolerance - This entry defines the X tolerance to warn you when the system is not leveled.
NivelYTilt - This entry defines the current Y tilt of the Nivel. Do NOT set this entry manually. The software sets it after it performs an orient-to-gravity command.
NivelYTolerance - This entry defines the Y tolerance to warn you when the system is not leveled.
RequestInterval = 300 - This entry defines in milliseconds how frequent the system updates the readouts.
ScanInterval = 100 - This entry specifies in milliseconds how frequent the system takes scan samples.
SecondsToCheckEnvironment - This entry specifies in seconds how often the system reads the weather monitor.
SecondsToCheckGravity - This entry specifies in seconds how often the system reads the Nivel.
TrackerIPAddress = 192.168.0.1
TrackerPort = 700
Vector Distance - This entry defines the distance for the pulled-away vector.
WeatherMonitor - This entry defines the options to use for a weather monitor. If you do not use a weather monitor, set this entry to 0. To read and automatically set refraction, set this entry to 2.