This entry is not used.
This entry determines the "Y" location that is accessible from both arms. To determine this location, move the ram to the Y position where you want the transfer of the columns from one arm to the other to occur. The "Y" value should be entered as the TransferPoint setting.
PC-DMIS should give you a valid position for this entry that will work for both sides of the machine. If you do change the value, make sure that it can be reached by both arms; otherwise, you will be unable to transfer columns from one arm to the other.
Entry Name: TransferPoint
Entry Type: Real number that specifies the Y location for column transfer. The default value is 0.