This version of the zeiss.dll fixes the problem with manual probing on the HSS probe head.
Added a new value for CALC_VECTOR_TYPE Hardware (3). For details, see "zeiss.dll Version 1.76n".
CALCVECTOR_TYPE = [0123]
Example:
VAST_PROBE_TYPE
CALCVECTOR_TYPE=3
You can also trigger this option on by adding HARDWARE_VECTOR_IN_MANUAL=1 in the configuration file.
Example:
VAST_PROBE_TYPE
HARDWARE_VECTOR_IN_MANUAL=1
Added the newly-documented option MANUAL_PROBE_MODE
MANUAL_PROBE_MODE = 1
Use this option to downgrade HSS or VAST probe head into MT probe head probing. This is equivalent to an analog probe head on 8-bit controllers.
Instead of a sequence of commands M21 and M22, PC-DMIS sends the sequence with clamping to the controller. For example, M21XY and M22Z.