OBTYPE Enumeration
Description
The Object Type, or OBTYPE, is a special member of the Application (or PCDLRN) object. It contains several constant values tied to enumerations. You can use these values when working with the Commands.Add method and the Command.Type property.
The following list shows the available OBTYPE constants and their equivalent enumerations. These enumerated values are of type LONG:
Members
Member | Value | Description |
---|---|---|
ADJUST_FILTER | 595 | |
ANALYSIS_VIEW | 176 | |
ANGLE_HIT | 107 | |
ANYORDER_EXECUTETOL | 215 | |
ARRAY_INDEX | 95 | |
ASME_SIZE_COMMAND | 1321 | |
ASME_TOLERANCE_COMMAND | 1302 | |
ASSIGNMENT | 195 | |
ATTACH_PROGRAM | 22 | |
AUTO_ANGLE_FEATURE | 643 | |
AUTO_BLOB | 626 | |
AUTO_CIRCLE | 648 | |
AUTO_CONE | 655 | |
AUTO_CORNER_FEATURE | 644 | |
AUTO_CYLINDER | 656 | |
AUTO_EDGE_FEATURE | 642 | |
AUTO_ELLIPSE | 649 | |
AUTO_FLUSH_GAP | 625 | |
AUTO_HIGH_FEATURE | 645 | |
AUTO_LINE | 646 | |
AUTO_NOTCH | 652 | |
AUTO_PLANE | 647 | |
AUTO_POLYGON | 654 | |
AUTO_PROFILE_2D | 623 | |
AUTO_ROUND_SLOT | 650 | |
AUTO_SET | 620 | |
AUTO_SPHERE | 657 | |
AUTO_SQUARE_SLOT | 651 | |
AUTO_SURFACE_FEATURE | 641 | |
AUTO_VECTOR_FEATURE | 640 | |
AUTOCALIB_MASTERSLAVE_COMMAND | 144 | |
AUTOCALIB_PROBE_COMMAND | 143 | |
AUTOTRIGGERCOMMAND | 116 | |
BASIC_HIT | 104 | |
BASIC_SCAN_OBJECT | 214 | |
BASIC_SCRIPT | 12346 | |
BF2D_ALIGN | 13 | |
BF3D_ALIGN | 15 | |
BFUSER_ALIGN | 17 | |
BUNDLE_ALIGN | 123 | |
CALIB_ASSEMBLY | 142 | |
CALIB_SPHERE | 141 | |
CALIBRATEROTAB_COMMAND | 901 | |
CALL_SUBROUTINE | 76 | |
CASE_COMMAND | 92 | |
CHECK_DISTANCE | 102 | |
CLAMP | 99 | |
CLEARANCE_PLANE | 130 | |
CNC_PASS_THRU_COMMAND | 807 | |
CNC_READ_VARIABLE | 806 | |
CNC_SELECT_TABLE_COMMAND | 808 | |
CNC_SET_PROTECTION_COMMAND | 803 | |
CNC_UPDATE_TOOLOFSET | 804 | |
CNC_UPDATE_WORKOFSET | 800 | |
CNC_USE_WORKOFSET | 801 | |
CNC_WRITE_VARIABLE | 805 | |
COLUMN132_DISPLAY | 181 | |
CONST_ALN_LINE | 548 | |
CONST_ALN_PLANE | 576 | |
CONST_BF_CIRCLE | 521 | |
CONST_BF_CONE | 552 | |
CONST_BF_CYLINDER | 561 | |
CONST_BF_ELLIPSE | 581 | |
CONST_BF_LINE | 541 | |
CONST_BF_PLANE | 571 | |
CONST_BF_SLOT | 506 | |
CONST_BF_SPHERE | 531 | |
CONST_BF_SQSLOT | 590 | |
CONST_BFRE_CIRCLE | 520 | |
CONST_BFRE_CONE | 551 | |
CONST_BFRE_CYLINDER | 560 | |
CONST_BFRE_ELLIPSE | 580 | |
CONST_BFRE_LINE | 540 | |
CONST_BFRE_PLANE | 570 | |
CONST_BFRE_SLOT | 507 | |
CONST_BFRE_SPHERE | 530 | |
CONST_BFRE_SQSLOT | 591 | |
CONST_CAST_CIRCLE | 525 | |
CONST_CAST_CONE | 555 | |
CONST_CAST_CYLINDER | 564 | |
CONST_CAST_ELLIPSE | 584 | |
CONST_CAST_LINE | 545 | |
CONST_CAST_PLANE | 574 | |
CONST_CAST_POINT | 517 | |
CONST_CAST_SLOT | 509 | |
CONST_CAST_SPHERE | 534 | |
CONST_CAST_SQSLOT | 593 | |
CONST_CONE_CIRCLE | 524 | |
CONST_CORNER_POINT | 518 | |
CONST_CYLINDER_CIRCLE | 538 | |
CONST_DROP_POINT | 514 | |
CONST_EXTRACTED_CIRCLE | 3003 | |
CONST_EXTRACTED_CONE | 3006 | |
CONST_EXTRACTED_CYLINDER | 3007 | |
CONST_EXTRACTED_EDGE_POINT | 559 | |
CONST_EXTRACTED_PLANE | 3002 | |
CONST_EXTRACTED_ROUND_SLOT | 3004 | |
CONST_EXTRACTED_SPHERE | 3008 | |
CONST_EXTRACTED_SQUARE_SLOT | 3005 | |
CONST_EXTRACTED_SURFACE | 3009 | |
CONST_EXTRACTED_SURFACE_POINT | 3001 | |
CONST_EXTREME_POINT | 3000 | |
CONST_HIPNT_PLANE | 579 | |
CONST_INT_CIRCLE | 526 | |
CONST_INT_ELLIPSE | 585 | |
CONST_INT_LINE | 546 | |
CONST_INT_POINT | 516 | |
CONST_MID_LINE | 544 | |
CONST_MID_PLANE | 573 | |
CONST_MID_POINT | 513 | |
CONST_MIN_CIRCLE_SCAN | 528 | |
CONST_OFF_LINE | 547 | |
CONST_OFF_PLANE | 575 | |
CONST_OFF_POINT | 511 | |
CONST_ORIG_POINT | 510 | |
CONST_PIERCE_POINT | 515 | |
CONST_PLTO_LINE | 550 | |
CONST_PLTO_PLANE | 578 | |
CONST_PRIMARY_DATUM | 579 | |
CONST_PROJ_CIRCLE | 522 | |
CONST_PROJ_CONE | 553 | |
CONST_PROJ_CYLINDER | 562 | |
CONST_PROJ_ELLIPSE | 582 | |
CONST_PROJ_LINE | 542 | |
CONST_PROJ_POINT | 512 | |
CONST_PROJ_SLOT | 508 | |
CONST_PROJ_SPHERE | 532 | |
CONST_PROJ_SQSLOT | 592 | |
CONST_PRTO_LINE | 549 | |
CONST_PRTO_PLANE | 577 | |
CONST_REV_CIRCLE | 523 | |
CONST_REV_CONE | 554 | |
CONST_REV_CYLINDER | 563 | |
CONST_REV_ELLIPSE | 583 | |
CONST_REV_LINE | 543 | |
CONST_REV_PLANE | 572 | |
CONST_REV_SPHERE | 533 | |
CONST_ROUND_SLOT | 505 | |
CONST_SCAN_SEG_ARC | 527 | |
CONST_SCAN_SEG_LINE | 539 | |
CONST_SECONDARY_DATUM_LINE | 557 | |
CONST_SET | 596 | |
CONST_SPHERE_CIRCLE | 537 | |
CONST_TANCIRCLES_CIRCLE | 536 | |
CONST_TANGENT_PLANE | 579 | |
CONST_TANLINES_CIRCLE | 529 | |
CONST_TERTIARY_DATUM_POINT | 558 | |
CONST_TRANSLATED_PLANE | 569 | |
CONST_VECT_DIST_POINT | 519 | |
CONST_WIDTH1D_FEATURE | 588 | |
CONST_WIDTH2D_FEATURE | 586 | |
CONST_WIDTH3D_FEATURE | 587 | |
CONTACT_ANGLE_POINT_FEATURE | 605 | |
CONTACT_CIRCLE_FEATURE | 612 | |
CONTACT_CONE_FEATURE | 615 | |
CONTACT_CORNER_POINT_FEATURE | 606 | |
CONTACT_CYLINDER_FEATURE | 616 | |
CONTACT_EDGE_POINT_FEATURE | 604 | |
CONTACT_ELLIPSE_FEATURE | 621 | |
CONTACT_HIGH_POINT_FEATURE | 607 | |
CONTACT_LINE_FEATURE | 614 | |
CONTACT_PLANE_FEATURE | 617 | |
CONTACT_POLYGON_FEATURE | 627 | |
CONTACT_SLOT_NOTCH_FEATURE | 622 | |
CONTACT_SLOT_ROUND_FEATURE | 618 | |
CONTACT_SLOT_SQUARE_FEATURE | 619 | |
CONTACT_SPHERE_FEATURE | 613 | |
CONTACT_SURFACE_POINT_FEATURE | 603 | |
CONTACT_VECTOR_POINT_FEATURE | 602 | |
CORNER_HIT | 106 | |
CURVE_FEATURE | 38 | |
DATDEF_COMMAND | 1299 | |
DCCSCAN_OBJECT | 211 | |
DEFAULT_CASE_COMMAND | 94 | |
DIMENSION_2D_ANGLE | 1109 | |
DIMENSION_2D_DISTANCE | 1107 | |
DIMENSION_3D_ANGLE | 1108 | |
DIMENSION_3D_DISTANCE | 1106 | |
DIMENSION_A_LOCATION | 1007 | |
DIMENSION_ANGULARITY | 1112 | |
DIMENSION_CIRCULAR_RUNOUT | 1117 | |
DIMENSION_CIRCULARITY | 1101 | |
DIMENSION_COAXIALITY | 1114 | |
DIMENSION_CONCENTRICITY | 1111 | |
DIMENSION_CYLINDRICITY | 1116 | |
DIMENSION_D_LOCATION | 1005 | |
DIMENSION_END_LOCATION | 1001 | |
DIMENSION_END_ROUGHNESS | 1122 | |
DIMENSION_FLATNESS | 1102 | |
DIMENSION_FLATNESS_LOCATION | 1018 | |
DIMENSION_FORMAT | 180 | |
DIMENSION_H_LOCATION | 1017 | |
DIMENSION_INFORMATION | 182 | |
DIMENSION_KEYIN | 1113 | |
DIMENSION_L_LOCATION | 1012 | |
DIMENSION_PA_LOCATION | 1010 | |
DIMENSION_PARALLELISM | 1104 | |
DIMENSION_PD_LOCATION | 1013 | |
DIMENSION_PERPENDICULARITY | 1103 | |
DIMENSION_PR_LOCATION | 1009 | |
DIMENSION_PROFILE | 1105 | |
DIMENSION_PROFILE_LINE | 1118 | |
DIMENSION_PROFILE_SURFACE | 1105 | |
DIMENSION_R_LOCATION | 1006 | |
DIMENSION_ROUGHNESS | 1121 | |
DIMENSION_ROUNDNESS | 1101 | |
DIMENSION_ROUNDNESS_LOCATION | 1019 | |
DIMENSION_RS_LOCATION | 1016 | |
DIMENSION_RT_LOCATION | 1014 | |
DIMENSION_RUNOUT | 1110 | |
DIMENSION_S_LOCATION | 1015 | |
DIMENSION_START_LOCATION | 1000 | |
DIMENSION_START_ROUGHNESS | 1120 | |
DIMENSION_STRAIGHTNESS | 1100 | |
DIMENSION_STRAIGHTNESS_LOCATION | 1020 | |
DIMENSION_SYMMETRY | 1115 | |
DIMENSION_T_LOCATION | 1008 | |
DIMENSION_TOTAL_RUNOUT | 1110 | |
DIMENSION_TRUE_D1_LOCATION | 1214 | |
DIMENSION_TRUE_D2_LOCATION | 1215 | |
DIMENSION_TRUE_D3_LOCATION | 1216 | |
DIMENSION_TRUE_DD_LOCATION | 1205 | |
DIMENSION_TRUE_DF_LOCATION | 1206 | |
DIMENSION_TRUE_DIAM_LOCATION | 1209 | |
DIMENSION_TRUE_END_POSITION | 1201 | |
DIMENSION_TRUE_FLATNESS_LOCATION | 1217 | |
DIMENSION_TRUE_LD_LOCATION | 1210 | |
DIMENSION_TRUE_LF_LOCATION | 1212 | |
DIMENSION_TRUE_LOCATION | 1220 | |
DIMENSION_TRUE_PA_LOCATION | 1208 | |
DIMENSION_TRUE_PR_LOCATION | 1207 | |
DIMENSION_TRUE_ROUNDNESS_LOCATION | 1218 | |
DIMENSION_TRUE_START_POSITION | 1200 | |
DIMENSION_TRUE_STRAIGHTNESS_LOCATION | 1219 | |
DIMENSION_TRUE_WD_LOCATION | 1211 | |
DIMENSION_TRUE_WF_LOCATION | 1213 | |
DIMENSION_TRUE_X_LOCATION | 1202 | |
DIMENSION_TRUE_Y_LOCATION | 1203 | |
DIMENSION_TRUE_Z_LOCATION | 1204 | |
DIMENSION_V_LOCATION | 1011 | |
DIMENSION_X_LOCATION | 1002 | |
DIMENSION_Y_LOCATION | 1003 | |
DIMENSION_Z_LOCATION | 1004 | |
DISPLAY_METAFILE | 702 | |
DISPLAYPRECISION | 114 | |
DO_COMMAND | 81 | |
EDGE_HIT | 109 | |
ELSE_COMMAND | 91 | |
ELSE_IF_COMMAND | 90 | |
END_ALIGN | 19 | |
END_CASE_COMMAND | 85 | |
END_DEFAULT_CASE_COMMAND | 87 | |
END_ELSE_COMMAND | 84 | |
END_ELSE_IF_COMMAND | 83 | |
END_HYPER_FORM | 12351 | |
END_HYPER_REPORT | 12349 | |
END_IF_COMMAND | 82 | |
END_MEASURED_FEATURE | 213 | |
END_MOVE_SWEEP | 159 | |
END_PROGRAM | 169 | |
END_READ_TEMPERATURE | 409 | |
END_SCRIPT | 12347 | |
END_SELECT_COMMAND | 86 | |
END_SUBROUTINE | 77 | |
ENDWHILE_COMMAND | 80 | |
EQUATE_ALIGN | 11 | |
EW_GROUP_END | 753 | |
EW_GROUP_START | 752 | |
EXTERNAL_COMMAND | 175 | |
FASTPROBEMODE_COMMAND | 902 | |
FEATURE_CONTROL_FRAME | 184 | |
FILE_IO_OBJECT | 96 | |
FILTER_SET | 598 | |
FLY_MODE | 168 | |
GAGE_FEATURE | 2121 | |
GAP_ONLY | 193 | |
GENERIC_CONSTRUCTION | 597 | |
GET_PROBE_DATA | 61 | |
GET_PROBECHANGER_DATA | 262 | |
GOTO_COMMAND | 73 | |
HYPER_CUSTOM | 12352 | |
HYPER_FORM | 12350 | |
HYPER_LABEL | 12356 | |
HYPER_LEGACY | 12348 | |
HYPER_REPORT | 12355 | |
HYPER_TEMPLATE | 12353 | |
IF_BLOCK_COMMAND | 89 | |
IF_GOTO_COMMAND | 74 | |
IGNOREMOTIONERRORS | 119 | |
IGNOREROTAB_COMMAND | 900 | |
INBETWEEN_TOL | 1301 | |
IOCHANNELCOMMAND | 120 | |
ISO_SIZE_COMMAND | 1320 | |
ISO_TOLERANCE_COMMAND | 1303 | |
ITER_ALIGN | 12 | |
LABEL_CMD | 72 | |
LASER_CIRCLE_FEATURE | 270 | |
LASER_CONE_FEATURE | 281 | |
LASER_CYLINDER_FEATURE | 279 | |
LASER_EDGE_POINT_FEATURE | 276 | |
LASER_FLUSH_AND_GAP_FEATURE | 274 | |
LASER_LINE_FEATURE | 277 | |
LASER_PLANE_FEATURE | 272 | |
LASER_POLYGON_FEATURE | 280 | |
LASER_SCANNING_PROFILE | 2030 | |
LASER_SLOT_FEATURE | 273 | |
LASER_SLOT_SQUARE_FEATURE | 278 | |
LASER_SPHERE_FEATURE | 275 | |
LASER_SURFACE_POINT_FEATURE | 271 | |
LEAPFROG | 115 | |
LEVEL_ALIGN | 2 | |
LOAD_COLUMN | 173 | |
LOAD_FIXTURE | 172 | |
LOAD_MACHINE | 171 | |
LOOP_END | 71 | |
LOOP_START | 70 | |
MAN_DCC_MODE | 103 | |
MANRETRACT | 117 | |
MANSCAN_OBJECT | 212 | |
MEASURED_CIRCLE | 202 | |
MEASURED_CONE | 205 | |
MEASURED_CYLINDER | 206 | |
MEASURED_LINE | 204 | |
MEASURED_PLANE | 207 | |
MEASURED_POINT | 201 | |
MEASURED_ROUND_SLOT | 208 | |
MEASURED_SET | 210 | |
MEASURED_SPHERE | 203 | |
MEASURED_SQUARE_SLOT | 209 | |
MEASURED_TORUS | 200 | |
MESH_ALIGN | 18 | |
MESH_OPER_COLORMAP | 2024 | |
MESH_OPER_CROSSSECTION | 2026 | |
MESH_OPER_EMPTY | 2025 | |
MESH_OPER_FILEEXPORT | 2023 | |
MESH_OPER_FILEIMPORT | 2022 | |
MESH_OPER_RESET | 2032 | |
MESH_OPER_SELECTION | 2031 | |
MESH_OPER_THICKNESS_COLORMAP | 2028 | |
MOVE_ALL | 162 | |
MOVE_CIRCULAR | 155 | |
MOVE_CLEARP | 151 | |
MOVE_CLEARPOINT | 163 | |
MOVE_EXCLUSIVE | 161 | |
MOVE_INCREMENT | 154 | |
MOVE_PH9_OFFSET | 156 | |
MOVE_POINT | 150 | |
MOVE_ROTAB | 153 | |
MOVE_SPEED | 45 | |
MOVE_SWEEP_POINT | 160 | |
MOVE_SYNC | 157 | |
ONERROR | 78 | |
OPTIONMOTION | 112 | |
OPTIONPROBE | 111 | |
PART_TEMPERATURE | 408 | |
PLANNER_ANGLE_POINT_FEATURE | 2110 | |
PLANNER_CIRCLE_FEATURE | 2102 | |
PLANNER_CONE_FEATURE | 2108 | |
PLANNER_CORNER_POINT_FEATURE | 2111 | |
PLANNER_CYLINDER_FEATURE | 2107 | |
PLANNER_EDGE_POINT_FEATURE | 2101 | |
PLANNER_ELLIPSE_FEATURE | 2112 | |
PLANNER_FLUSH_AND_GAP_FEATURE | 2115 | |
PLANNER_HIGH_POINT_FEATURE | 2118 | |
PLANNER_LINE_FEATURE | 2103 | |
PLANNER_PLANE_FEATURE | 2104 | |
PLANNER_POLYGON_FEATURE | 2113 | |
PLANNER_SLOT_NOTCH_FEATURE | 2114 | |
PLANNER_SLOT_ROUND_FEATURE | 2105 | |
PLANNER_SLOT_SQUARE_FEATURE | 2106 | |
PLANNER_SPHERE_FEATURE | 2109 | |
PLANNER_SURFACE_POINT_FEATURE | 2116 | |
PLANNER_VECTOR_POINT_FEATURE | 2100 | |
POINT_INFO | 183 | |
POINTCLOUD | 2001 | |
POINTCLOUD_ALIGN | 16 | |
POINTCLOUD_MESH | 2004 | |
POINTCLOUD_OPER | 2002 | |
POINTCLOUD_OPER_BOOLEAN | 2016 | |
POINTCLOUD_OPER_CLEAN | 2012 | |
POINTCLOUD_OPER_COLORMAPFACE | 2019 | |
POINTCLOUD_OPER_COLORMAPPNT | 2020 | |
POINTCLOUD_OPER_CROSSSECTION | 2021 | |
POINTCLOUD_OPER_EMPTY | 2013 | |
POINTCLOUD_OPER_FILEEXPORT | 2011 | |
POINTCLOUD_OPER_FILEIMPORT | 2010 | |
POINTCLOUD_OPER_FILTER | 2017 | |
POINTCLOUD_OPER_NEW | 2003 | |
POINTCLOUD_OPER_OLD | 2009 | |
POINTCLOUD_OPER_PURGE | 2015 | |
POINTCLOUD_OPER_RESET | 2014 | |
POINTCLOUD_OPER_SELECTION | 2018 | |
POINTCLOUD_OPER_THICKNESS_COLORMAP | 2029 | |
POLARVECTORCOMP | 113 | |
POSITIVE_REPORTING | 196 | |
PREHIT_DISTANCE | 100 | |
PRINT_FORM_FEED | 750 | |
PRINT_REPORT | 751 | |
PROBE_COMPENSATION | 140 | |
READ_POINT | 192 | |
READ_TEMPERATURE | 404 | |
RECALL_ALIGN | 10 | |
RECALL_VIEWSET | 51 | |
RETRACT_DISTANCE | 101 | |
RETROLINEAR_ONLY | 194 | |
RMEAS_MODE | 110 | |
ROTATE_ALIGN | 3 | |
ROTATE_CIRCLE_ALIGN | 14 | |
ROTATEOFF_ALIGN | 6 | |
SAVE_ALIGN | 9 | |
SCAN_SPEED | 47 | |
SECTION_2DRADIUS | 2027 | |
SELECT_COMMAND | 93 | |
SET_ACTIVE_TIP | 60 | |
SET_COMMENT | 170 | |
SET_WORKPLANE | 21 | |
SIMULTANEOUS_EVALUATION | 1300 | |
SIMULTANEOUS_TOLERANCE_COMMAND | 1322 | |
SNAPSHOT_COMMAND | 905 | |
SPC_CHART | 780 | |
START_ALIGN | 1 | |
START_MOVE_SWEEP | 158 | |
START_SUBROUTINE | 75 | |
STATISTICS | 190 | |
SURFACE_FEATURE | 39 | |
SURFACE_HIT | 108 | |
TABLE_FORMAT | 179 | |
TEMP_COMP | 62 | |
TEMP_COMP_ORIGIN | 63 | |
THICKNESS_GAGE | 2119 | |
THICKNESS_SCAN | 2120 | |
TOUCH_SPEED | 46 | |
TPS_CUSTOM_COMMAND | 402 | |
TRACEFIELD | 191 | |
TRACKER_CUSTOM_COMMAND | 401 | |
TRACKER_LEVEL_TO_GRAVITY | 233 | |
TRANS_ALIGN | 4 | |
TRANSOFF_ALIGN | 5 | |
TRIGGER_PLANE_COMMAND | 232 | |
TRIGGER_TOLERANCE | 231 | |
UNTIL_COMMAND | 88 | |
VECTOR_HIT | 105 | |
VIDEOSETUP | 118 | |
VIEWSET | 50 | |
VISION_ANGLE_POINT_FEATURE | 249 | |
VISION_CIRCLE_FEATURE | 245 | |
VISION_EDGE_POINT_FEATURE | 242 | |
VISION_ELLIPSE_FEATURE | 244 | |
VISION_IMAGE_CAPTURE | 253 | |
VISION_LINE_FEATURE | 243 | |
VISION_POLYGON_FEATURE | 251 | |
VISION_PROFILE_2D_FEATURE | 247 | |
VISION_SLOT_NOTCH_FEATURE | 250 | |
VISION_SLOT_ROUND_FEATURE | 246 | |
VISION_SLOT_SQUARE_FEATURE | 248 | |
VISION_SURFACE_POINT_FEATURE | 241 | |
WHILE_COMMAND | 79 | |
WRIST_SPEED | 49 | |
X_TEMPERATURE | 405 | |
XML_STATISTICS | 189 | |
Y_TEMPERATURE | 406 | |
Z_TEMPERATURE | 407 |