Additional Information for Creating Multiple Arm Machines

If you use PC-DMIS in offline mode, you can also create and place a simulated multiple-arm machine into the Graphic Display window.

1. Follow PC-DMIS multiple-arm setup procedures.

2. Enter multiple arm mode. The Active Arms toolbar appears. This enables the Dual Horizontal Arm option from the Machine Type area.

3. Create a multiple arm measurement routine.

4. Follow the "Selecting or Creating a New Animated Machine for Display" procedure (make sure you select the Dual Horizontal Arm option button from the Machine Type area).

5. The Graphic Display window should now show a dual arm machine when finished.