Step 3 - Define the Number of Ports

The final step prior to LSPX3 / HR-X (HR-X3-P) probe changer calibration is to define the number of ports.

To define the number of ports:

1. Select the Ports tab in the Probe Changer dialog box (Edit | Preferences | Probe Changer).

Probe Changer dialog box - Ports tab

2. In the Active probe changer list, select Probe Changer : TYPE= LSPX3.

3. In the Number of ports box, type the number of ports that the probe changer has.

4. To save your changes, click Apply.

You are now ready to begin calibration. The next step starts the calibration process.