To Dimension a Feature Using the CONCENTRICITY Option

1. Select Insert | Dimension | Concentricity from the submenu. The Concentricity dialog box appears.

2. Select the feature(s) to dimension from the Feature List box.

3. Type the plus tolerance value in the Plus box.

4. Select either Inch or MM in the Units section.

5. Select where to output the dimension information. Select the Statistics, Report, Both, or None option.

6. Select the optional Display check box if you want to view dimension information in the Graphic Display window.

7. Select the desired analysis options by selecting the Textual check box or the Graphical check box. If the Graphical check box was marked, type the multiplier value in the Multiplier box.

8. If desired, select the Display check box in the Dimension Info area and click Edit to select the Dimension Info Format you would like displayed in the Graphic Display window.

9. Click the Create button.

The dimension appears in the Edit window with this information:

dimension_name = CONCENTRICITY,FROM feat_1,TO feat_2

or

dimension_name = CONCENTRICITY,FROM feat_1,TO THE ORIGIN