Select Insert | Dimension | Runout | Circular or Insert | Dimension | Runout | Total from the submenu. The Total Runout or Circular Runout dialog box appears.
Select the feature(s) to dimension from the Feature List box.
Type the plus tolerance value in the Plus box.
Select either Inch or MM in the Units area.
Select where to output the dimension information. Select the Statistics, Report, Both, or None option.
Select the optional Display check box if you want to view dimension information in the Graphic Display window.
Select the desired analysis options by marking the Textual check box or the Graphical check box. If the Graphical check box was marked, enter the Multiplier value in the Multiplier box.
If desired, select the Display check box in the Dimension Info area and click Edit to select the Dimension Info Format you would like displayed in the Graphic Display window.
Click the Create button.
The dimension will appear in the Edit window with this information:
dimension_name = RUNOUT,OF feat_1,TO feat_2
AX |
NOM |
+TOL |
-TOL |
MEAS |
MAX |
MIN |
DEV |
OUT-TOL |
M |
0.0000 |
0.0100 |
0.0100 |
5.0000 |
0.0000 |
0.0000 |
0.0000 |
0.0000 |