B-Probe Buttons
Button 1 - Button 1 functions are:
Click and hold button 1 to turn the probe on.
Once the probe turns on, use button 1 to take your measurements.
Button 2 - Button 2 functions are:
Click and hold button 2 to turn the probe on.
Once the probe turns on, use button 2 to take your measurements.
Click and hold button 2 to turn the probe off.
IJK Behavior on B-Probe Points
If aligned to the part, PC-DMIS always stores the IJK values perpendicular to one of the active coordinate system axes, except if you use Point Only mode.