If you are using a portlock, connect it to your USB port. You must have a properly configured LMS license or portlock available during the PC-DMIS installation.
Execute setup.exe from the PC-DMIS Installation media. Follow the on-screen instructions.
If the Leica/LeicaLMF option is enabled on your LMS license or portlock, PC-DMIS loads and uses the Leica/LeicaLMF interface when you work online.
If the All interfaces option is enabled in your LMS license or portlock, you may need to manually rename Leica.dll/LeicaLMF.dll to interfac.dll. Leica.dll/LeicaLMF.dll is in the PC-DMIS install directory.
You can also select the interface from the PC-DMIS menu before you load a measurement routine. For details, see the "Switchable Portable Interface" topic.
From the C:\ProgramData\Microsoft\Windows\Start Menu\Programs\<PC-DMIS Version> folder, make a copy the PC-DMIS Online shortcut, and modify its target as follows:
For 6dof Capable Trackers (AT901):
C:\<PC_DMIS_INSTALL_DIRECTORY>\PCDLRN.exe" /portable:LEICA
For 3D Trackers (AT401):
C:\<PC_DMIS_INSTALL_DIRECTORY>\PCDLRN.exe" /portable:LEICARIO
For LMF Trackers (AT930/960):
C:\<PC_DMIS_INSTALL_DIRECTORY>\PCDLRN.exe" /portable:LEICALMF
You can use this shortcut to launch PC-DMIS and open PC-DMIS with the additional interface items. Do not launch PC-DMIS at this time.
You can also select the interface from the PC-DMIS menu before you load a measurement routine. For details, see the "Switchable Portable Interface" section of this document.