To install PC-DMIS Portable for the Leica Total Station, if you use a portlock, insert it into your computer and run the PC-DMIS setup program. Your LMS license or portlock must be configured to use the Total Station interface. Once you have run the setup program, run PC-DMIS. You are ready to start measuring.
If you are an AE and you have your LMS license or portlock
programmed for all interfaces, you can run the PC-DMIS setup program with
the following startup option to get an install of PC-DMIS as if your LMS
license or portlock was programmed specifically for the Total Station.
The word "Interface" is case sensitive.
/Interface:leicatps
This adds /portable:leicatps switches
onto the offline and online shortcuts as well as copies the custom layouts
associated with the Total Station.