In the Option section of the PC-DMIS Settings Editor, PC-DMIS provides the AutoAdjustTesaM5Degrees entry to assist in migrating measurement routines between two machines that use a PH10 probe on one machine and a Tesa Star M probe on the other. Both machines must have probe files with the same name (although the probe files themselves will be different).
If the entry is set to 1, when a measurement routine that was created initially on one of these machines is then loaded onto the other, PC-DMIS converts any active TIP/ commands to the closest AB tip angle based on the index increment. If any angles are converted, a message box appears displaying them.
If the entry is set to 0, PC-DMIS does not perform this angle adjustment.
For details, see the "AutoAdjustTesaM5Degrees" topic in the "Option" section of the PC-DMIS Settings Editor documentation.