HP-C-T Camera Installation

For additional details, refer to the factory's setup documentation.

To install the software and configure the frame grabber hardware, do the following:

1. Install the USB to Ethernet to USB communication cabling.

2. Copy and unzip the deva036usb software.

3. Connect the HP-C-T to the machine.

4. Open Device Manager. Look for Other Devices/Unknown device

5. Update the driver. Select Browse my computer for drivers and go to the directory where deva036usb was unzipped.

6. Verify there is a Deva36 USB Video Probe under Universal Serial Bus controllers in the Device Manager and that the status is that it is working properly.

7. Run PC-DMIS in Administrator mode.

8. Close PC-DMIS.

9. Configure the PC-DMIS frame grabber and camera settings. For more details, see the " Interface-Specific Options " topic.

10. Run PC-DMIS.

11. Confirm the live image view is working.