The RDS Scanning error message "Initialization: Waiting for camera…" occurs when the scanner cannot connect or communicate with the computer.
There are a number of solutions to resolve this issue. The most likely cause is an IP-address mismatch. Make sure that you enter the IP address on the LAN or Wifi connection correctly.
6-axis arms with a FP1 + HP-L-8.9 scanner and/or a FP2/FP2P for battery: 192.168.0.100 (You can replace the .100 with any number from .5 to .254)
7-axis arms with any feature pack: 192.168.178.100 (You can replace the .100 with any number from .5 to .198)
You can set the PLUS Feature Packs such as the FP3P and FP2P to automatically assign the IP address (leave on "automatic"), or you can assign a static IP address.
HP-L-20.8 Scanner on a 7-axis Arm + FP4: 192.168.150.1 (controller @ = 192.168.150.100)
For a complete description on how to set the IP address, see the “How do I set the Static IP Address for my Scanner or CMM?” article on the Hexagon Knowledgebase site.
For more solutions to this error message, see the "My ROMER arm is not connecting with the camera." article on the Hexagon Knowledgebase site.
More: