The value for this setting is a parameter which you can use for the listed probe types. For details on this setting, see the general version of this setting ("ProbeMaxForce").
Entry Name: ProbeMaxForce_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
Entry Type: Real Number specified in newtons. The default values for each probe type are listed below.
List of Default Values
Probe Type | Default Value |
LSPX1C | 0.096 |
LSPX1H | 0.096 |
LSPX1M | 0.048 |
LSPX1S | 0.096 |
LSPX3 | 0.5 |
LSPX5 | 1.0 |
SP25 | 0.15 |
SP600 | 0.36 |
SP80 | 0.6 |