The value for this setting is a parameter which you can use for the listed probe types. For details on this setting, see the general version of this setting ("ProbeUpperForce").
Entry Name: ProbeUpperForce_(LSPX1C,LSPX1H,LSPX1M,LSPX1S,LSPX3,LSPX5,SP25,SP600,SP80)
Entry Type: Real Number specified in newtons. The default values for each probe type are listed below.
List of Default Values
Probe Type | Default Value |
LSPX1C | 0.072 |
LSPX1H | 0.072 |
LSPX1M | 0.036 |
LSPX1S | 0.072 |
LSPX3 | 0.25 |
LSPX5 | 0.25 |
SP25 | 0.075 |
SP600 | 0.18 |
SP80 | 0.16 |