Graphic View toolbar
The Graphic View toolbar (View | Toolbars | Graphic View) changes how your part is displayed inside the Graphic Display window.
Many of these icons act the same as if you had used the View Setup dialog box to affect the view. For information on setting up your views, see the "Setting up the Screen View" topic in the "Editing the CAD Display" chapter.
If you configured the Graphic Display window to show more than one view, some icons affect only the blue pane in the Views area of the View Setup dialog box.
For example, if you divided your screen into three views by using this icon from the View Setup dialog box:
This toolbar contains the following icons:
Graphic Window
in X+
Shows the X+ view of the part
Graphic Window
in X-
Shows the X- view of the part
Graphic Window in Y+
Shows the Y+ view of the part
Graphic Window
in Y-
Shows the Y- view of the part
Graphic Window
in Z+
Shows the Z+ view of the part
Graphic Window
in Z-
Shows the Z- view of the part
You can also click on a face of the Trihedron Rotation interface on the bottom left of the Graphic Display window to rotate the model and "square up" the view to that face. For more information, see "Using the Trihedron Rotation Interface".
Graphic Window
in Isometric
Shows an isometric view of the part
Graphic Window Based on Probe Orientation
Pans, zooms, and rotates the view to look at the part along the probe axis of the current probe's tip angle
Show Graphic Window as Solid
Graphic Display window switches between a wireframe or solid view of the part
Surface
Edges
Draws a bold line around edges of surfaces. These are called "surface edges". This icon becomes available when the Solid icon is selected. You can customize the color and size of surface edges through the Wireframe tab of the CAD and Graphic Setup dialog box. For information, see "Wireframe Tab" in the "Editing the CAD Display: Introduction" chapter.
Part Model Transparency
Turns transparency on or off for the part model. This marks or clears the Enable transparency check box on the Lighting tab of the CAD and Graphic Setup dialog box for the part model.
For information on the transparency settings on that tab, see "Lighting Tab" in the "Editing the CAD Display" chapter.
Toggle Graphic
Display Window 3D
Displays or hides the 3D Grid in the Graphic Display window.